石油科技论坛

石油科技论坛 ›› 2017, Vol. 36 ›› Issue (增刊): 151-153.DOI: 10. 3969/ j. issn. 1002-302x. 2017. z1. 042

• • 上一篇    下一篇

一种用于致密油气藏的抑制水锁型耐高温压裂液

张佩玉1，刘建伟1，李天君1，刘新球2   

  1. 1. 中国石油吐哈油田公司工程技术研究院; 2. 中国石油吐哈油田公司科技信息处
  • 出版日期:2018-03-25 发布日期:2018-04-13

High Temperature Resistant Fracturing Fluid Specially Designed for Tight Reservoirs to Control Water Locking

Zhang Peiyu1,, Liu Jianwei1,, Li Tianjun1,, Liu Xinqiu2   

  1. 1. Petroleum Research and Development Center of PetroChina Tuha Oilfield Company, Shanshan 838202, China; 2. Science and Technology Department of PetroChina Tuha Oilfield Company, Shanshan 838202, China
  • Online:2018-03-25 Published:2018-04-13

PDF

摘要： 致密油气藏压裂用抑制水锁型耐高温压裂液, 是针对常规水基压裂液体系在致密油气藏压裂时易产生水 锁伤害, 致使压裂后不能增产的难题研发的。采用水锁抑制剂与水溶性阳离子复合后, 减小了压裂液在储层孔隙中的 毛管阻力, 有效地解决了低渗透或致密油气藏压裂时水基压裂液易发生水锁的问题。同时通过采用多头交联的有机硼 交联剂, 使压裂液可交联成复杂体型凝胶, 从而大幅增加凝胶的强度和耐温抗剪切性能。现场应用结果证明本产品在 低渗透或致密油、气藏压裂, 可大幅提高增产效果, 经济效益显著。

关键词: 抑制水锁; 致密油气藏; 耐高温压裂液; 破胶性能; 抗剪切

Abstract: A high temperature resistant fracturing specially designed for tight reservoirs to control water locking is focused on settlement of the bottleneck that conventional water-based fracturing fluid system, which easily causes water-locking damage in fracturing of tight oil and gas reservoirs, making higher production impossible after fracturing operation. Water-locking inhibitor and water soluble cationic are combined to reduce the capillary resistance of fracturing fluid in the pores of reservoir and effective solve the problem of water locking easily caused by water-based fracturing fluid at the time of fracturing the low-permeability and tight oil and gas reservoirs. Meanwhile, the multiheaded crosslinked organic boron crosslinking agent is used to make the fracturing fluid crosslinked into a complicatedly-structured gel, significantly improving strength, temperature and anti-shearing capacity of the gel. The results of field application indicated that this product can substantially raise production and economic performance in fracturing of low-permeability and tight oil and gas reservoirs.

Key words: control water locking, tight oil reservoir, high temperature resistant fracturing fluid